Instructions On How to Use the Irontite Ceramic Seals
One is supposed to have in mind that the irontite ceramic seals are essential especially to the individuals who know their benefits in the cooling system. The vehicles are just like the body of a human being and need to be maintained for proper functioning. There are several things that are entailed in the proper functioning of a vehicle. The engine and the cooling systems can become extremely hot and may require cooling.
One is supposed to have in mind that the irontite ceramic seals play an important role in coating the interiors of the cooling system. It is important to know that the engine’s cooling system needs to be cleaned before the application of the irontite ceramic seals. Irontite thoro-flush is the product used in cleaning the system. One is supposed to have in mind that there are certain procedures that can be used to coat the cooling system. Here is the procedure.
One needs to understand that the initial step in the coating of the cooling system should be cleaning and draining it. It is essential to learn that the irontite thoro-flush is the product which is normally used here. This product is used alongside clean water. The rinsing is done at least twice to ensure that it is clean and dust-free. The next thing that you are supposed to do is filling the radiator with water and the thro-flush. It is advisable that you cap the hose directly into the radiator through the mouth. One is supposed to understand that it is only possible to use this method in case the radiator is not pressurized. The next thing that you are supposed to don is shaking the bottle to ensure that the contents are well-mixed. It is necessary to learn that water and the ceramic seal are then filled into the coolant system. Make sure that the water used is soft to avoid corrosion.
The ceramic seal will stain the required parts. It is recommended that you clear any stains on the neck and cap of the radiator. You should ensure that you recap the radiator once it is cleared of any stain. The next thing that you are supposed to do is filling the overflow tank with water and then starting the vehicle. It is then essential to have the engine run for an hour before it is flushed entirely with water. For the system to dry, it is advisable that you open it and leave it for a minimum of 12 hours. You are supposed to know that a coolant mixture should then be added into the system to make it leak-proof.